SLT3 Tester

The SLT3 Tester is a rugged, lightweight product designed to verify the integrity of 1, 2, 3, and 4 pair UTP channels. Incorporating a unique 3-in-1 design, this tester features built-in modular jacks for USOC, EIA 568A and 568B wiring sequences. Simply connect the master and slave unit to each end of the cable under test, and the SLT3 automatically verifies correct cable sequence, as well as open and short circuits.

33A-100-10 – Available globally (except for Poland).
33-100 – Available in APAC/USA only.
33.D0020P – Available in Poland only.
33.B0020 – Available in APAC only.

• Innovative 3-in-1 design features modular jacks for testing USOC, 568A and 568B cabling systems
• Accurately verifies the continuity and sequence of 1-, 2- , 3, and 4 pair UTP and STP channels
• Continuously-sequencing LED display provides a diagnostic readout that immediately detects shorts, opens, reversals and
  mis-wires at a glance
• Simply snap and lock master and remote units together when not in use
• Ergonomically designed hand- held unit is lightweight, rugged, and impact-resistant
• 9 Volt alkaline battery included
• SLT3 performs shield continuity on STP systems

MECHANICAL
Material: Thermoplastic UL94V-0 Black Case, red latch
Power Requirements: 9V Alkaline Battery (included)
Jack Contact Material: 50 μinches gold over 100μ inches nickel

PHYSICAL
SLT3 Single Line Tester
Set Dimensions: 146mm x 58mm x 38mm (5.75”H x 2.3”W x 1.5”D)
Shipping Weight: 224g (8 oz.)

Master Dimensions: 109mm x 58mm x 38mm (4.3”H x 2.3”W x 1.5”D)
Shipping Weight: 140g (5 oz.)

Remote Dimensions: 109mm x 58mm x 38mm (4.3”H x 2.3”W x 1.5”D)
Shipping Weight: 84g (3 oz.)